EnglishViews: 0 Author: Site Editor Publish Time: 2023-01-05 Origin: Site
The customized LED linear light, as the name suggests, is a luminaire that combines linear elements with LED light and can be mounted seamlessly on a wall or cabinet. It is also available in a wide variety of forms to meet the needs of different scenarios and enhance the ambiance of a space. Let's take a look at the installation of the customized LED linear light.
Here is the content list:
How to install customized LED linear light indoors.
Outdoor installation of the customized LED linear light.
Wiring and installation of the customized LED linear light.
Customized LED linear light connection distances.
The installation of customized LED linear light is very simple when used for interior decoration. Each of our wholesale customized LED linear lights is self-adhesive with 3M double-sided tapes on the back. To install, simply peel off the 3M double-sided stickers and fix the light strip to the area to be installed, flattening it with your hand. LED linear lighting is a circuit structure consisting of 3 LED beads connected in series and parallel in a group. Every 3 LED beads can be cut off and used individually for as long as needed, but the pad needs to be paid attention to.
The outdoor installation of the customized LED linear light focuses more on the waterproofness of the strip and the solidity of the installation. Because the LED line will withstand the weather, if fixed with 3m glue, over time will cause 3m glue in the LED light line loss will be reduced, outdoor installation is often used in this way to fix the slot that needs to be cut and connected. For indoor installation, only need to add waterproof glue to consolidate the waterproof effect of the connection point. This can then be fixed with special clips, either by drilling holes with an electric hammer or by using plastic expansion tubes with screw clips.
The customized LED linear light is generally available in voltages of AC220V, DC12V, and DC24V, so a suitable switching power supply is required. The size of the power supply is determined by the power of the LED strip and the length of the connection. It should be noted that DC12V and DC24V should not be connected to AC220V, as this will burn out all the lamp beads. DC12V cannot be connected to the DC24V control power supply, otherwise, the power will be more than doubled, and it is also easy to burn out the lamp beads.
AC220V strip lights can be connected directly to the mains. RGB seven-colour LED strips require the use of a controller to achieve the effect of change, generally with 4 lines to distinguish between black, red, green, and blue. The seven-color strip is generally a common anode, i.e. there is a +12V above the strip connected to the black wire and another to the negative, and the RGB is connected to the corresponding red, green and blue interface or power cable.
Generally speaking, the longer connection distance is 20 meters for the 3528 series customized LED linear light and 15 meters for the 5050 series customized LED linear light. If the connection distance is exceeded, the LED linear lighting tends to get hot, which can affect the service life of the customized LED linear light during use. In addition, the simple controller has a range of 10 to 15 meters, while the remote control has a range of 15 to 20 meters and can control up to 30 meters. If the customized LED linear light is connected over a longer distance and the controller is unable to control that long strip, an amplifier will be required for splicing. The installation must therefore be carried out by the manufacturer's requirements.
Our official website is https://www.mcledalu.com/. If you work with customized LED linear light or would like to know more about our company, you can talk to us on the website. We will be happy to provide more and better services with high-quality customized LED linear light products, good services, and competitive prices!
